 |
 |
 |
 |
Chuck Lee Cottonwood Vintage 5 string open back banjo. Maple neck, 12" rim and nickel plated hardware.
Note: Our banjos are individually inspected, set up and tuned by the banjo.com staff in Georgia. We are banjo players, so we set them up the way we want to play them! Each banjo is in tune when we carefully pack it for shipment. Climate conditions and travel will affect the tuning, so it may need to be fine-tuned before playing. |
|
 |
 |
|
 |
 |
 |
 |
 |
Features
- Neck: Maple with two-way truss rod adjustable from the heel. Also an easy action height adjustment at the heel. Vintage scalloped bone nut and a Frailing scoop.
- Fingerboards: Ebony fingerboards and peghead overlays. Fingerboard dots, offset from center and side dots of Mother of Pearl or Abalone at 3, 7, 10 , two @ 12, 15 & 17
- Pegheads: Peghead designs vary between models.
- Inlay: Traditional to fanciful depending on model and series.
- Rims: Rims is 12" two-ply Maple, 3" to 3 1/4" tall and 7/16" thick. This may vary on some models.
- Tone Rings: The array of models offer the following popular tone rings: Wooden, Brass Hoop, Electric (aka Whyte Laydie), Ebony (and other exotic woods), Tuba-Phone, Dobson, FF Bacon and the Silver Bell (made right here in Texas by JLS).
- Hardware: Nickel plated Ball end nuts, Shoes, Screws, Hooks, Tension Hoops, and No-Knot tailpiece are standard on all models with a Renaissance Head.
|
|
 |
 |
 |
 |
|
 |

|